Looking to install an irrigation system but have no power? Considering a generator for pumping requirements? Looking for a controller to operate generator starts, and run solenoid valves in the system? Then the Heron 2-Wire Hybrid may be just what you are looking for.
The Heron Battery 2-Wire Hybrid Controller offers an effective means of running a complete generator powered irrigation system.
Complete with battery back-up during stand-by, this unit acts as a stand alone command controller, designed to provide a signal start to an auto-start generator, allowing a "warm up" time for the generator, and then converting to AC power itself to start and run the irrigation sequence. On completion, the controller allows the generator to "cool down" before going into a battery backed-up stand-by mode.
Features and Benefits
- Run valves over a considerable distance
- Decoder based system, with each valve "coded" according to decoder
- No limitations according to topography
- Available in 40 & 240 output versions
- Compatible with 24VAC valves
- Additional valves can be added to cable at any time by simply connecting with decoder unit
- Valves can be individually named
- Additional inputs can be added, such as digital inputs, flow meters or switched inputs
- Tolerant to poor cable and earth leakages
Capabilities
- Up to 60 independent irrigation programmes
- Run up to 16 valves in parallel as standard
- 64 automatic starts
- Valve times from 2 second to 10 hours
- Valves can be added together to form valve groups
- Valves can be set to run on time or volume basis (requires pulse flow meter)
- Manual start of irrigation valves, programmes or multiple programmes
- Irrigation programmes can be integrated with light, rain, humidity and temperature sensors
- Valves can be individually named for ease of identification at control point
- Up to 10 remote inputs
For more information on this product, contact us.