Netafim Pulsar StripNet Pro - Newleaf Irrigation

PRESSURE-COMPENSATED, PULSATING, STRIP TYPE FROST MITIGATION EMITTER

APPLICATIONS

Pressure compensated
Recommended working pressure: 2.5 up to 4.0 bar.
Rectangular water pattern: 0.5m width x 6.0m length
Recommended filtration : 130 micron / 120 mesh. Filtration method is to be selected based on the kind and concentration of the dirt particles existing in the water. Wherever sand exceeding 2 ppm exists in the water, a Hydro-cyclone filter is to be installed before the main filter. When sand/ silt/ clay solids exceed 100 ppm, pre treatment will be applied according to Netafim™ expert team's instructions.
Inlet connector: Press fit.
No moving parts
chemical resistant to standard nutrients used in agriculture.

Regulation system makes it an ideal solution for sloping applications, and long runs.
Less than half the water required vs. conventional full coverage systems, savings of up to 70%.
Easy to install and maintain: simple, modular parts
Distributes small water amounts over large wetted area.